BCJFC - FASCAT 2003

  • MSDS: BCJFC
  • Manufacturer: M AND T CHEMICALS INC
  • Product Name: FASCAT 2003
  • National Stock Number: 6850-00N002686
Product Identification

Product ID:FASCAT 2003
MSDS Date:01/01/1985
FSC:6850
NIIN:00N002686
MSDS Number: BCJFC

Responsible Party
M & T CHEMICALS, INC

Emergency Phone: 201-499-2401

Cage: 2A781

Contractor
M & T CHEMICALS. CAGE CANCELLED

Cage: 27201

Ingredients

STANNOUS OCTOATE

Fraction By Weight: 97%

OSHA PEL S, 0.1 MG/M3 (SN)

ACGIH TLV: S, 0.1 MG/M3 (SN)

Hazards

Effects of Overexposure:SKIN & EYE IRRITATION. FUMES OR VAPORS MAY BE
IRRITATING TO UPPER RESPIRATORY TRACT.

First Aid

First Aid:EYES: WASH EYES WITH WATER FOR 15 MINUTES. SKIN: WASH SKIN
THOROUGHLY WITH SOAP & WATER. CALL PHYSICIAN. REMOVE CONTAMINATED
CLOTHING & SHOES. WASH CLOTHING BEFORE REUSE. INHAL: REMOVE FROM
EXPOSURE. CALL PHYSICIAN.

Fire Fighting

Flash Point:288F, 142C
Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:AVOID SKIN & EYE CONTACT & BREATHING FUMES
Unusual Fire/Explosion Hazard:PRODUCT GIVES OF IRRITATING FUMES WHEN
HEATED

Accidental Release

Spill Release Procedures:COVER WITH SAND OR OTHER INERT MATERIAL.
TRANSFER TO SUITABLE CONTAINERS FOR DISPOSAL. SPILLS MAY BE
INJURIOUS TO AQUATIC LIFE IF DISCHARGED TO OPEN WATERS.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:AVOID EYE & SKIN CONTACT. DO NOT BREATH FUMES OR
VAPORS.

Exposure Controls

Respiratory Protection:MANUFACTURER STATES NOT NORMALLY REQUIRED
Ventilation:MECH VENT REQUIRED; LOCAL EXHAUST RECOMMENDED TO KEEP Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
AFTER HOURS PHONE NUMBER: 499-2445

Chemical Properties

HCC:N1
Spec Gravity:1.25
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR YELLOW LIQUID, CHARACTERISTIC ODOR

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:CONTACT WITH ELEVATED TEMPERATURES OR OPEN
FLAMES.

Disposal

Waste Disposal Methods:MANUFACTURER RECOMMENDS INCINERATION OR DISPOSE
OF AS A SOLID WASTE. DISPOSAL METHODS MUST BE IAW FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.